D. T. Martin, Design, Fabrication, and Characterization of a MEMS Dual-backplate Capacitive Microphone, 2007.

D. Chatzopoulos, Modeling the Performance of MEMS Based Directional Microphones, Naval Postgraduate School, 2008.

B. Kaushik, D. Nance, and K. K. Ahuja, A Review of the Role of Acoustic Sensors in the Modern Battlefield, 11th AIAA/CEAS Aeroacoustics Conference, pp.23-25, 2005.
DOI : 10.2514/6.2005-2997

P. R. Scheeper, A. G. Van-der-donk, W. Olthuis, and P. Bergveld, A review of silicon microphones, Sensors and Actuators A: Physical, vol.44, issue.1, pp.1-11, 1994.
DOI : 10.1016/0924-4247(94)00790-X

P. Hsu, C. H. Mastrangelo, and K. D. Wise, A high sensitivity polysilicon diaphragm condenser microphone, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176), pp.25-29, 1998.
DOI : 10.1109/MEMSYS.1998.659822

D. Hohm and G. Hess, A subminiature condenser microphone with silicon nitride membrane and silicon back plate, The Journal of the Acoustical Society of America, vol.85, issue.1, pp.476-480, 1989.
DOI : 10.1121/1.397699

Z. Shu, M. Ke, G. Chen, R. Horng, C. Chang et al., Design and Fabrication of Condenser Microphone Using Wafer Transfer and Micro-Electroplating Technique, Proceedings of the Design, Test, Integration and Packaging of MEMS/MOEMS, pp.9-11, 2008.
URL : https://hal.archives-ouvertes.fr/hal-00277746

Q. Zou, Z. Li, and L. Liu, Design and Fabrication of Silicon Condenser Microphone Using Corrugated Diaphragm Technique, J. Microelectromech. Syst, vol.5, pp.197-204, 1996.

P. Honzík, A. Podkovskiy, S. Durand, N. Joly, and M. Bruneau, Analytical and numerical modeling of an axisymmetrical electrostatic transducer with interior geometrical discontinuity, The Journal of the Acoustical Society of America, vol.134, issue.5, pp.3573-3579, 2013.
DOI : 10.1121/1.4824342

A. Podkovskiy, P. Honzík, S. Durand, N. Joly, and M. Bruneau, Miniaturized Electrostatic Receiver with Small-Sized Backing Electrode, Proceedings of Meetings on Acoustics, pp.2-7, 2013.
DOI : 10.1121/1.4805732

F. Vogel, H. Landes, R. Lerch, M. Kaltenbacher, and R. Peipp, Numerical Simulation and Optimization of Capacitive Transducers, Proceedings of EuroSime, pp.399-405, 2003.

P. E. Gill and E. Wong, Sequential Quadratic Programming Methods, pp.147-224, 2012.
DOI : 10.1007/978-1-4614-1927-3_6

G. Derringer and R. Suich, Simultaneous Optimization of Several Response Variables, J. Qual. Technol, vol.12, pp.214-219, 1980.

L. A. Sarabia and M. C. Ortiz, Response Surface Methodology, Comprehensive Chemometrics
DOI : 10.1016/B978-044452701-1.00083-1

T. Lavergne, S. Durand, M. Bruneau, and N. Joly, Dynamic behavior of the circular membrane of an electrostatic microphone: Effect of holes in the backing electrode, The Journal of the Acoustical Society of America, vol.128, issue.6, pp.3459-3477, 2010.
DOI : 10.1121/1.3504706

M. Bruneau, A. Bruneau, Z. ?kvor, and P. Lotton, An Equivalent Network Modelling the Strong Coupling Between a Vibrating Membrane and a Fluid Film, Acta Acust, vol.2, pp.223-232, 1994.

A. Bower, Applied Mechanics of Solids, 2010.

P. M. Morse and K. Uno-ingard, Theoretical Acoustics, 1986.
DOI : 10.1063/1.3035602

J. Merhaut, A Contribution to the Theory of Electroacoustic Transducers Based on Electrostatic Principle, Acustica, vol.19, pp.283-292, 1967.

W. P. Baker, G. A. Kriegsmann, and E. L. Reiss, Acoustic scattering by baffled cavity???backed membranes, The Journal of the Acoustical Society of America, vol.83, issue.2, pp.423-432, 1988.
DOI : 10.1121/1.396543

A. Prak, F. R. Blom, M. Elwenspoek, and T. S. Lammering, Q-factor and frequency shift of resonating silicon diaphragms in air, Sensors and Actuators A: Physical, vol.27, issue.1-3, pp.25-27, 1991.
DOI : 10.1016/0924-4247(91)87072-B

S. Ren, W. Yuan, D. Qiao, J. Deng, and X. Sun, A Micromachined Pressure Sensor with Integrated Resonator Operating at Atmospheric Pressure, Sensors, vol.13, issue.12, pp.17006-17024, 2013.
DOI : 10.3390/s131217006

K. K. Park, H. J. Lee, P. Crisman, M. Kupnik, O. Oralkan et al., Optimum design of circular CMUT membranes for high quality factor in air, 2008 IEEE Ultrasonics Symposium, pp.2-5, 2008.
DOI : 10.1109/ULTSYM.2008.0123

G. S. Rautela, R. D. Snee, and W. K. Miller, Response-Surface Co-optimization of Reaction Conditions in Clinical Chemical Methods, Clin. Chem, vol.25, pp.1954-1964, 1979.

J. K. Telford, A Brief Introduction to Design of Experiments, Johns Hopkins APL Tech. Dig, vol.27, pp.224-232, 2007.

R. Bahloul, A. Mkaddem, P. Dal-santo, and A. Potiron, Sheet metal bending optimisation using response surface method, numerical simulation and design of experiments, International Journal of Mechanical Sciences, vol.48, issue.9, pp.991-1003, 2006.
DOI : 10.1016/j.ijmecsci.2006.03.004

P. Stehouwer, Design of Experiments for Numerical Parameter Studies of Electronic Systems: Optimizing the Cooling Strategy of an Ethernet Switch, Electronics Cooling Magazine, 2005.

J. Gou, C. Zhang, Z. Liang, B. Wang, and J. Simpson, Resin transfer molding process optimization using numerical simulation and design of experiments approach, Polymer Composites, vol.31, issue.1, pp.1-12, 2003.
DOI : 10.1002/pc.10000

E. Rosales, M. A. Sanromán, and M. Pazos, Application of central composite face-centered design and response surface methodology for the optimization of electro-Fenton decolorization of Azure B dye, Environmental Science and Pollution Research, vol.161, issue.5, pp.1738-1746
DOI : 10.1007/s11356-011-0668-0

D. C. Montgomery and G. C. Runger, Multiple Linear Regression, Applied Statistics and Probability for Engineers, pp.410-467, 2007.

D. C. Montgomery and G. C. Runger, Design and Analysis for Single-Factor Experiments: The Analysis of Variance, Applied Statistics and Probability for Engineers, pp.468-504, 2007.