S. Park and Y. Chung, Tool-path generation from measured data, Computer-Aided Design, vol.35, issue.5, pp.467-475, 2000.
DOI : 10.1016/S0010-4485(02)00070-2

Y. Zhang and L. Ge, Adaptive tool-path generation on point-sampled surfaces, 2011.

H. Feng and Z. Teng, Iso-planar piecewise linear NC tool path generation from discrete measured data points, Computer-Aided Design, vol.37, issue.1, pp.55-64, 2005.
DOI : 10.1016/j.cad.2004.04.001

K. L. Chui, W. K. Chiu, and K. Yu, Direct 5-axis tool-path generation from point cloud input using 3D biarc fitting, Robotics and Computer-Integrated Manufacturing, vol.24, issue.2, pp.270-286, 2008.
DOI : 10.1016/j.rcim.2006.11.004

Y. Sun, D. Guo, and Z. Jia, Iso-parametric tool path generation from triangular meshes for free-form surface machining, International Journal of Advenced manufacturing, vol.28, pp.721-726, 2006.

S. Park, Sculptured surface machining using triangular mesh slicing, Computer-Aided Design, vol.36, issue.3, 2004.
DOI : 10.1016/S0010-4485(03)00114-3

C. Jun, D. Kim, and S. Park, A new curve-based approach to polyhedral machining, Computer-Aided Design, vol.34, issue.5, 2002.
DOI : 10.1016/S0010-4485(01)00110-5

S. Kim and M. Yang, A CL surface deformation approach for constant scallop height tool path generation from triangular mesh, The International Journal of Advanced Manufacturing Technology, vol.28, issue.3-4, pp.314-320, 2006.
DOI : 10.1007/s00170-004-2372-4

B. Lauwers, G. Kiswanto, and J. Kruth, Development of a Five-axis Milling Tool Path Generation Algorithm based on Faceted Models, CIRP Annals - Manufacturing Technology, vol.52, issue.1, pp.85-88, 2003.
DOI : 10.1016/S0007-8506(07)60537-X

J. Lu, R. Cheatham, C. Jensen, Y. Chen, and B. Bowman, A three-dimensional configuration-space method for 5-axis tessellated surface machining, International Journal of Computer Integrated Manufacturing, vol.4, issue.5, pp.550-568, 2008.
DOI : 10.1080/00207540410001671651

G. Kiswanto, B. Lauwers, and J. Kruth, Gouging elimination through tool lifting in tool path generation for five-axis milling based on faceted models, The International Journal of Advanced Manufacturing Technology, vol.2, issue.1???2, pp.293-309, 2007.
DOI : 10.1007/s00170-005-0338-9

A. Lasemi, D. Xue, and P. Gu, Recent development in NC machining of freeform surfaces: A stat-of-the-art review, Comput-Aided Des, vol.42, 2010.

J. Chaves-jacob, J. Linares, and J. Sprauel, Increasing of surface quality in friction free-form surfaces of knee prosthesis. CIRP Annals ? Manufacturing Technology, pp.531-534, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01437103

J. Langeron, E. Duc, C. Lartigue, and P. Bourdet, A new format for 5-axis tool path computation, using Bspline curves, Computer-Aided Design, vol.36, issue.12, pp.1219-1229, 2004.
DOI : 10.1016/j.cad.2003.12.002

C. Lartigue, C. Tournier, M. Ritou, and D. Dumur, High-Performance NC for HSM by means of Polynomial Trajectories, CIRP Annals - Manufacturing Technology, vol.53, issue.1, pp.317-320, 2004.
DOI : 10.1016/S0007-8506(07)60706-9

T. Yong and R. Narayanaswami, A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining, Computer-Aided Design, vol.35, issue.13, pp.1249-1259, 2003.
DOI : 10.1016/S0010-4485(03)00043-5

S. Lavernhe, C. Tournier, and C. Lartigue, Kinematical performance prediction in multi-axis machining for process planning optimization, The International Journal of Advanced Manufacturing Technology, vol.53, issue.1, pp.534-544, 2008.
DOI : 10.1007/s00170-007-1001-4

URL : https://hal.archives-ouvertes.fr/hal-00373706

G. Vickers and K. Quan, Ball-Mills Versus End-Mills for Curved Surface Machining, Journal of Engineering for Industry, vol.111, issue.1, 1989.
DOI : 10.1115/1.3188728

Y. Huang and J. Oliver, Non-constant parameter nc tool path generation on sculptured surfaces. The international journal of advanced manufacturing technology 9, pp.281-290
DOI : 10.1007/bf01781282