P. Eiamsa-ard, N. Piriyarungroj, C. Thianpong, and S. Eiamsa-ard, A case study on thermal performance assessment of a heat exchanger tube equipped with regularly-spaced twisted tapes as swirl generators, Case Studies in Thermal Engineering, pp.86-102, 2014.

C. Biegger, C. Sotgiu, and B. Weigand, Numerical investigation of flow and heat transfer in a swirl tube, International Journal of Thermal Sciences, vol.96, pp.319-330, 2015.
DOI : 10.1016/j.ijthermalsci.2014.12.001

R. Hreiz and C. Gentric, Noël Midoux, Numerical investigation of swirling flow in cylindrical cyclones, chemical engineering research and design, pp.2521-2539, 2011.
DOI : 10.1016/j.cherd.2011.05.001

O. Tlili, E. May, I. Mokni, H. Mhiri, and P. Bournot, CFD investigation of a vortex tube: Effect of the cold end orifice in the temperature separation mechanism, pp.84-89, 2011.

R. Guizani, H. Inèsmokni, P. Mhiri, and . Bournot, CFD modeling and analysis of the fishhook effect on the rotor separator's efficiency, Powder Technology, pp.149-157, 2014.
DOI : 10.1016/j.powtec.2014.05.020

J. Oh, J. Hwang, and Y. Yoon, EINOx scaling in a non premixed turbulent hydrogen jet with swirled coaxial air, international j. of hydrogen energy, pp.8715-8722, 2010.
DOI : 10.1016/j.ijhydene.2010.04.159

C. Z. Xiouris and P. Koutmos, Fluid dynamics modeling of a stratified disk burner in swirl co-flow, Applied Thermal Engineering, vol.35, pp.60-70, 2012.
DOI : 10.1016/j.applthermaleng.2011.10.007

N. Khaldi, Y. Chouari, H. Mhiri, and P. Bournot, CFD investigation on the flow and combustion in a 300 MWe tangentially fired pulverized-coal furnace, Heat and Mass Transfer
DOI : 10.1007/s00231-015-1710-4

N. Syred and J. M. Beér, Combustion in swirling flows: A review, Combustion and Flame, vol.23, issue.2, pp.143-201, 1974.
DOI : 10.1016/0010-2180(74)90057-1
URL : http://iopscience.iop.org/article/10.1088/1742-6596/891/1/012237/pdf

S. Ishizuka, T. Motodamari, and D. Shimokuri, Rapidly mixed combustion in a tubular flame burner, Proceedings of the Combustion Institute, vol.31, issue.1, pp.1085-1092, 2007.
DOI : 10.1016/j.proci.2006.07.128

B. Shi, D. Shimokuri, and S. Ishizuka, Methane/oxygen combustion in a rapidly mixed type tubular flame burner, Proceedings of the Combustion Institute, vol.34, issue.2, pp.3369-3377, 2013.
DOI : 10.1016/j.proci.2012.06.133

B. Shi, D. Shimokuri, and S. Ishizuka, Reexamination on methane/oxygen combustion in a rapidly mixed type tubular flame burner, Combustion and Flame, vol.161, issue.5, pp.1310-1325, 2014.
DOI : 10.1016/j.combustflame.2013.11.001

B. Shi, J. Hu, H. Peng, and S. Ishizuka, Flow visualization and mixing in a rapidly mixed type tubular flame burner, Experimental Thermal and Fluid Science, pp.1-11, 2014.
DOI : 10.1016/j.expthermflusci.2014.01.009

B. Shi, J. Hu, and S. Ishizuka, Carbon dioxide diluted methane/oxygen combustion in a rapidly mixed tubular flame burner, Combustion and Flame, vol.162, issue.2, pp.420-430, 2014.
DOI : 10.1016/j.combustflame.2014.07.022

E. S. Richardson, R. Sankaran, R. W. Grout, and J. H. Chen, Numerical analysis of reaction???diffusion effects on species mixing rates in turbulent premixed methane???air combustion, Combustion and Flame, vol.157, issue.3, pp.506-515, 2010.
DOI : 10.1016/j.combustflame.2009.11.007
URL : https://eprints.soton.ac.uk/172577/1/Richardson_CnF2010.pdf

K. Tatsumi, M. Tanaka, P. L. Woodfield, and K. Nakabe, Swirl and buoyancy effects on mixing performance of baffle-plate-type miniature confined multijet, International Journal of Heat and Fluid Flow, vol.31, issue.1, pp.31-45, 2010.
DOI : 10.1016/j.ijheatfluidflow.2009.09.005

K. K. Dinesh, M. P. Kirkpatrick, and K. W. Jenkins, Investigation of the influence of swirl on a confined coannular swirl jet, Computers & Fluids, vol.39, issue.5, pp.756-767, 2010.
DOI : 10.1016/j.compfluid.2009.12.004

Y. Yang, ?. Soren, and . Knudsen-kaer, Large-eddy simulations of the non-reactive flow in the Sydney swirl burner, International Journal of Heat and Fluid Flow, vol.36, pp.2012-2059
DOI : 10.1016/j.ijheatfluidflow.2012.02.008

M. Pathak, A. Dewan, and A. K. Dass, An assessment of streamline curvature effects on the mixing region of a turbulent plane jet in crossflow, Applied Mathematical Modelling, vol.29, issue.8, pp.711-725, 2005.
DOI : 10.1016/j.apm.2004.10.010

F. Chang and V. K. Dhir, Turbulent flow field in tangentially injected swirl flows in tubes, International Journal of Heat and Fluid Flow, vol.15, issue.5, pp.346-356, 1994.
DOI : 10.1016/0142-727X(94)90048-5

J. M. Beer, N. A. Chigier, T. W. Davies, and K. Bassindale, Laminarization of turbulent flames in rotating environments, Combustion and Flame, vol.16, issue.1, pp.39-45, 1971.
DOI : 10.1016/S0010-2180(71)80009-3

A. Zawadzki and J. Jarosinski, Laminarization of flames in rotating flow, Combustion Science and Technology, vol.34, issue.6, pp.1-13, 1983.
DOI : 10.1098/rspa.1965.0011

S. Elghobashi, On predicting particle-laden turbulent flows, Applied Scientific Research, vol.1, issue.4, pp.309-329, 1994.
DOI : 10.1016/S0065-2687(08)60106-5

D. E. Stock, Particle Dispersion in Flowing Gases???1994 Freeman Scholar Lecture, Journal of Fluids Engineering, vol.6, issue.1, pp.4-17, 1996.
DOI : 10.1016/S0065-2687(08)60106-5

W. Sun, W. Zhong, S. Yongzhang, and L. -. , LES-DPM simulation of turbulent gas-particle flow on opposed round jets, Powder Technology, vol.270, pp.302-311, 2015.
DOI : 10.1016/j.powtec.2014.10.039

. Fluent, FLUENT 6.3 user's guide, 2006.

S. A. Morsi and A. J. Alexander, An investigation of particle trajectories in two-phase flow systems, Journal of Fluid Mechanics, vol.none, issue.02, pp.193-208, 1972.
DOI : 10.1017/S0022112072001806

O. Kitoh, Experimental study of turbulent swirling flow in a straight pipe, Journal of Fluid Mechanics, vol.12, issue.-1, pp.445-479, 1991.
DOI : 10.1017/S0022112082001293

R. Hreiz and C. Gentric, Noël Midoux, Numerical investigation of swirling flow in cylindrical cyclones, chemical engineering research and design, pp.2521-2539, 2011.

I. Mantilla, Bubble trajectory analysis in gas?liquid cylindrical cyclone separators. Master's thesis, The University of Tulsa, 1998.