S. Kang and K. Ahn, Dynamic modeling of solid oxide fuel cell and engine hybrid system for distributed power generation, Applied Energy, vol.195, pp.1086-1099, 2017.

T. Lan and K. Strunz, Multi-physics transients modeling of solid oxide fuel cells: methodology of circuit equivalents and use in EMTP-type power system simulation, Trans. Energy Convers, vol.32, issue.4, pp.1309-1321, 2017.

X. J. Luo and K. F. Fong, Development of a 2D dynamic model for hydrogen-fed and methane-fed solid oxide fuel cells, J. Power Sources, vol.328, pp.91-104, 2016.

A. Bertei, E. Ruiz-trejo, F. Tariq, V. Yufit, A. Atkinson et al., Validation of a physically-based solid oxide fuel cell anode model combining 3D tomography and impedance spectroscopy, Intern. J. Hydrogen Energy, vol.41, issue.47, pp.22381-22393, 2016.

S. Shen and M. Ni, 2D segment model for a solid oxide fuel cell with a mixed ionic and electronic conductor as electrolyte, Intern. J. Hydrogen Energy, vol.40, issue.15, pp.5160-5168, 2015.

Y. Huangfu, F. Gao, and A. Abbas-turki, Transient dynamic and modeling parameter sensitivity analysis of 1D solid oxide fuel cell model, Energy Conver. Managem, vol.71, pp.172-185, 2013.

D. Sergio-yesid-gómez and . Hotza, Current developments in reversible solid oxide fuel cells, Renewable and Sustainable Energy Reviews, vol.61, pp.155-174, 2016.

R. T. Nishida, S. B. Beale, and J. G. Pharoah, Comprehensive computational fluid dynamics model of solid oxide fuel cell stacks, Intern. J. Hydrogen Energy, vol.41, issue.45, pp.20592-20605, 2016.

B. J. Spivey and T. F. Edgar, Dynamic modeling, simulation, and MIMO predictive control of a tubular solid oxide fuel cell, Journal of Process Control, vol.22, issue.8, pp.1502-1520, 2012.

V. Menon, V. M. Janardhanan, S. Tischer, and O. Deutschmann, A novel approach to model the transient behavior of solid-oxide fuel cell stacks, Journal of Power Sources, vol.214, pp.227-238, 2012.

X. Jin and X. Xue, Mathematical modeling analysis of regenerative solid oxide fuel cells in switching mode conditions, Journal of Power Sources, vol.195, issue.19, pp.6652-6658, 2010.

C. Restrepo, T. Konjedic, and C. Guarnizo, Simplified Mathematical Model for Calculating the Oxygen Excess Ratio of a PEM Fuel Cell System in Real-Time Applications, IEEE Transactions on Industrial Electronics, vol.61, issue.6, pp.2816-2825, 2014.

Y. X. Wang and Y. B. Kim, Real-Time Control for Air Excess Ratio of a PEM Fuel Cell System, IEEE/ASME Transactions on Mechatronics, vol.19, issue.3, pp.852-861, 2014.

N. Katayama and S. Kogoshi, Real-Time Electrochemical Impedance Diagnosis for Fuel Cells Using a DC-DC Converter, IEEE Transactions on Energy Conversion, vol.30, issue.2, pp.707-713, 2015.

Y. Lee, J. Kim, and S. Yoo, On-line and real-time diagnosis method for proton membrane fuel cell (PEMFC) stack by the superposition principle, J. Power Sources, vol.326, pp.264-269, 2016.

V. Zaccaria, D. Tucker, and A. Traverso, A distributed real-time model of degradation in a solid oxide fuel cell, part I: Model characterization, Journal of Power Sources, vol.311, pp.175-181, 2016.

C. Wu, J. Chen, C. Xu, and Z. Liu, Real-Time Adaptive Control of a Fuel Cell/Battery Hybrid Power System with Guaranteed Stability, IEEE Trans. Control Sys. Tech, vol.25, issue.4, pp.1394-1405, 2017.

T. Fletcher, R. Thring, and M. Watkinson, An Energy Management Strategy to concurrently optimize fuel consumption & PEM fuel cell lifetime in a hybrid vehicle, International Journal of Hydrogen Energy, vol.41, issue.46, pp.21503-21515, 2016.

F. Gao, B. Blunier, M. Simoes, and A. Miraoui, PEM Fuel Cell stack modeling for real-time emulation in hardware-in-the-loop applications, IEEE Trans. Energy Convers, vol.26, issue.1, pp.184-194, 2011.

P. Massonnat, F. Gao, R. Roche, and D. Paire, Multiphysical, multidimensional real-time PEM fuel cell modeling for embedded applications, Energy Conv. Manag, vol.88, pp.554-564, 2014.

C. A. Paja, A. Romero, and R. , Evaluation of Fixed-Step Differential Equations Solution Methods for Fuel Cell Real-Time Simulation, Intern. Conf. Clean Electrical Power, 2007.

E. Breaz, F. Gao, D. Paire, and R. Tirnovan, Fuel cell modeling With dSPACE and OPAL-RT real time platforms, IEEE Transportation Electrification Con. and Expo (ITEC), pp.1-6, 2014.

J. H. Jung, S. Ahmed, and P. Enjeti, PEM Fuel Cell Stack Model Development for Real-Time Simulation Applications, IEEE Trans. Industrial Electronics, vol.58, issue.9, pp.4217-4231, 2011.

R. Ma, F. Gao, E. Breaz, Y. Huangfu, and P. Briois, Multi-Dimensional Reversible Solid Oxide Fuel Cell Modeling for Embedded Applications, IEEE Trans. Energy Convers, issue.99, pp.1-1
URL : https://hal.archives-ouvertes.fr/hal-02376893

C. Xuenian, L. Dequi, and L. Shouju, A class of parallel algorithms of real-time numerical simulation for stiff dynamic system, J. of Systems Engineering and Electronics, vol.11, issue.4, pp.51-58, 2000.

H. H. Rosenbrock, Some general implicit processes for the numerical solution of differential equations, The Computer Journal, vol.5, issue.4, pp.329-330, 1963.

Q. Feng, Improved biogeography-based optimization with random ring topology and Powell's method, Applied Mathematical Modelling, vol.41, pp.630-649, 2017.

P. Parks, Liapunov and the Schur-Cohn stability criterion, IEEE Transactions on Automatic Control, vol.9, issue.1, pp.121-121, 1964.