R. W. Johnstone, I. G. Foulds, and M. Parameswaran, Deep-UV exposure of poly(methyl methacrylate) at 1 254 nm using low-pressure mercury vapor lamps, Journal of Vacuum Science & Technology B: 2 Microelectronics and Nanometer Structures, vol.26, p.682, 2008.

N. Yufa, S. Fronk, S. B. Darling, R. Divan, W. Lopes et al., Modifying metal-polymer 4 nanostructures using UV exposure, Soft Matter, vol.5, p.1683, 2009.

B. L. Funt and K. C. Yu, Electroinitiated polymerization of methyl methacrylate in a homogeneous 6 medium, Journal of Polymer Science, vol.62, pp.359-367, 1962.

G. D. Salian, C. Lebouin, A. Demoulin, M. S. Lepihin, S. Maria et al.,

. Djenizian, Electrodeposition of polymer electrolyte in nanostructured electrodes for enhanced 9 electrochemical performance of thin-film Li-ion microbatteries, Journal of Power Sources, vol.340, pp.242-246, 2017.

N. Plylahan, S. Maria, T. N. Phan, M. Letiche, H. Martinez et al., 12 Enhanced electrochemical performance of Lithium-ion batteries by conformal coating of polymer 13 electrolyte, Nanoscale Research Letters, vol.9, p.544, 2014.

N. A. Kyeremateng, F. Dumur, P. Knauth, B. Pecquenard, and T. Djenizian, Electrodeposited copolymer 15 electrolyte into nanostructured titania electrodes for 3D Li-ion microbatteries, Comptes Rendus, p.16

. Chimie, , vol.16, pp.80-88, 2013.

N. Plylahan, N. A. Kyeremateng, M. Eyraud, F. Dumur, H. Martinez et al.,

. Djenizian, Highly conformal electrodeposition of copolymer electrolytes into titania nanotubes for 19 3D Li-ion batteries, Nanoscale Research Letters, vol.7, p.349, 2012.

N. A. Kyeremateng, F. Dumur, P. Knauth, B. Pecquenard, and T. Djenizian, Electropolymerization of 21 copolymer electrolyte into titania nanotube electrodes for high-performance 3D microbatteries, p.22

, Electrochemistry Communications, vol.13, pp.894-897, 2011.

S. Cram, Mechanism of electropolymerisation of methyl methacrylate and glycidyl acrylate on 24 stainless steel, Electrochimica Acta, vol.47, pp.1935-1948, 2002.

M. Braglia, I. V. Ferrari, L. Pasquini, T. Djenizian, M. Sette et al., , p.26

, Electrochemical synthesis of thin, dense, and conformal anion exchange membranes with quaternary 27 ammonium groups, Electrochimica Acta, vol.265, pp.78-88, 2018.

I. V. Ferrari, M. Braglia, T. Djenizian, P. Knauth, M. L. Di et al., , p.29

, Li-ion conducting solid polymer electrolyte on titania nanotubes for microbatteries, vol.353, pp.95-103, 2017.

G. Sundararajan and L. R. Krishna, Mechanisms underlying the formation of thick alumina coatings 32 through the MAO coating technology, Surface and Coatings Technology, vol.167, pp.269-277, 2003.

J. A. Curran and T. W. Clyne, Porosity in plasma electrolytic oxide coatings, Acta Materialia, vol.54, pp.1985-1993, 2006.

T. Weisemoeller, F. Bertram, S. Gevers, C. Deiter, A. Greuling et al., Effect of amorphous 37 interface layers on crystalline thin-film x-ray diffraction, Physical Review B, vol.79, 2009.

S. E. Fritz, S. M. Martin, C. D. Frisbie, M. D. Ward, and M. F. Toney, , p.40

, Pentacene Monolayer on an Amorphous SiO 2 Substrate with Grazing Incidence X-ray Diffraction, 41 Journal of the American Chemical Society, vol.126, pp.4084-4085, 2004.

H. Sirringhaus, P. J. Brown, R. H. Friend, M. M. Nielsen, K. Bechgaard et al., , p.43

A. J. Spiering, R. A. Janssen, E. W. Meijer, and P. Herwig, Two-dimensional charge transport in self-44 organized, high-mobility conjugated polymers, vol.401, p.4, 1999.

L. Reimer, Imaging with Secondary and Backscattered Electrons, in: Scanning Electron Microscopy, p.46

. Springer, , pp.227-271, 1985.

J. Song, C. Koch, and L. Wang, Correlation between Wear Resistance and Lifetime of Electrical 48 Contacts, Advances in Tribology, pp.1-9, 2012.

B. M. Rumyantsev, S. B. Bibikov, A. V. Bychkova, V. G. Leontiev, V. I. Berendyaev et al., , p.1

A. L. Kovarskii, Electric conductivity of polymer films filled with magnetic nanoparticles, Russian 2 Journal of Physical Chemistry A, vol.90, pp.2426-2433, 2016.

H. Q. Zhang, Y. Jin, and Y. Qiu, The optical and electrical characteristics of PMMA film prepared by spin 4 coating method, IOP Conference Series: Materials Science and Engineering, vol.87, p.12032, 2015.

A. R. Blythe, Electrical resistivity measurements of polymer materials, Polymer Testing, vol.4, pp.90012-90018, 1984.

R. Farahmand, B. Sohrabi, A. Ghaffarinejad, and M. R. Zamani-meymian, Synergistic effect of 9 molybdenum coating and SDS surfactant on corrosion inhibition of mild steel in presence of 3, p.5

. Nacl, Corrosion Science, vol.136, pp.393-401, 2018.

S. M. Niya and M. Hoorfar, On a possible physical origin of the constant phase element, p.12

S. C. Chung, J. R. Cheng, S. D. Chiou, and H. C. Shih, EIS behavior of anodized zinc in chloride 14 environments, Electrochimica Acta, vol.188, pp.1249-1268, 2000.

F. Yang, H. Kang, E. Guo, R. Li, Z. Chen et al., The role of nickel in mechanical 16 performance and corrosion behaviour of nickel-aluminium bronze in 3.5 wt.% NaCl solution, 17 Corrosion Science, vol.139, pp.333-345, 2018.

G. Song, A. Atrens, and M. Dargusch, In~uence of microstructure on the corrosion of diecast AZ80D, 19 Corrosion Science, p.25

J. Lee and D. Berman, Inhibitor or promoter: Insights on the corrosion evolution in a graphene protected 21 surface, Carbon, vol.126, pp.225-231, 2018.

A. Bahramian, M. Eyraud, F. Vacandio, and P. Knauth, Improving the corrosion properties of amorphous 23 Ni-P thin films using different additives, Surface and Coatings Technology, vol.345, pp.40-52, 2018.

T. Pojtanabuntoeng, B. Kinsella, H. Ehsani, and J. Mckechnie, Assessment of corrosion control by pH 26 neutralisation in the presence of glycol at low temperature, Corrosion Science, vol.126, pp.94-103, 2017.

G. Liu, Z. Huang, L. Wang, W. Sun, S. Wang et al., Effects of Ce4+ on the structure and 29 corrosion resistance of electroless deposited Ni-Cu-P coating, Surface and Coatings Technology, vol.30, pp.25-30, 2013.

W. Xu, X. Lu, B. Zhang, C. Liu, S. Lv et al., Effects of Porosity on Mechanical Properties 32 and Corrosion Resistances of PM-Fabricated Porous Ti-10Mo Alloy, Metals, vol.8, p.33, 2018.

J. Creus, H. Mazille, and H. Idrissi, Porosity evaluation of protective coatings onto steel, through 35 electrochemical techniques, Surface and Coatings Technology, vol.130, pp.224-232, 2000.

M. D. Vedenyapina, V. V. Kuznetsov, D. I. Rodikova, N. N. Makhova, and A. A. Vedenyapin, Anodic 38 corrosion of gold in solutions of diaminoalkanes, Mendeleev Communications, vol.28, pp.181-183, 2018.

G. S. Frankel, Pitting Corrosion of Metals, Journal of The Electrochemical Society, vol.145, 1998.

, Figure 5. (a) SE SEM image of C0, (b) SE SEM image of C100, (c) SE SEM image of C100, (d) BSE SEM image of C100, (e) SE SEM image of C100 (10kV electron beam power), and (f) cross-section BSE SEM image of C100

, Bode Z plots of (a) C0 and (b) C10 and (c) their |Z| values at 10 mHz during 240 hours immersion in 3% NaCl solution