J. Gross and J. Fricke, Ultrasonic velocity measurements in silica, carbon and organic aerogels, J. Non-Cryst. Solids, vol.145, pp.217-222, 1992.

G. A. Nicolaon and S. J. Teichner, New preparation process for silica xerogels and aerogels and their textural properties, Bull. Soc. Chim. France, vol.5, pp.1900-1906, 1968.

J. Fricke, Aerogels and their applications, J. Non-Cryst. Solids, pp.356-362, 1992.

D. W. Schaeffer and K. D. Keefer, Structure of Random Porous Materials: Silica Aerogel, Phys. Rev. Lett, vol.56, pp.2199-2202, 1986.

T. Woignier, J. Phalippou, J. Pelous, and E. Courtens, Different kinds of fractal structures in silica aerogels, J. Non-Cryst. Solids, vol.121, pp.198-201, 1990.

J. Brinker and G. W. Scherer, Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing, 1990.

M. A. Aegerter, N. Leventis, and M. M. Koebel, , 2011.

B. Baetens and A. Gustavsen, Aerogel insulation for building applications: a state-of-the-art review, Energy Build, vol.43, pp.761-769, 2011.

H. Nagahara, T. Suginouchi, and M. Hashimoto, Acoustic properties of nanofoam and its applied air-borne ultrasonic transducers, Proc. IEEE Ultrason. Symp, vol.3, pp.1541-1544, 2006.

S. Teichner, G. Nicolaon, G. Vicarini, and G. Gardes, Inorganic oxide aerogels, Adv Colloid Interface, vol.5, pp.245-273, 1976.

S. Standeker, Z. Novak, and Z. Knez, Removal of BTEX vapours from waste gas streams using silica aerogels of different hydrophobicity, J. Hazard. Mater, vol.165, pp.1114-1118, 2009.

S. M. Alatalo, F. Pileidis, E. Mäkilä, M. Sevilla, E. Repo et al., Versatile Cellulose-Based Carbon Aerogel for the Removal of Both Cationic and Anionic Metal Contaminants from Water, ACS Appl. Mater. Interfaces, vol.7, issue.46, pp.25875-25883, 2015.

H. Maleki, Recent advances in aerogels for environmental remediation applications, Chemical Engineering Journal, vol.300, pp.98-118, 2016.

W. Yin and D. A. Rubenstein, Biomedical applications of aerogels, Aerogels Handbook, pp.681-694, 2011.

I. Smirnova, Pharmaceutical applications of aerogels, Aerogels Handbook, pp.695-718, 2011.

A. Santos, J. Toledo-fernández, R. Mendoza-serna, L. Gago-duport, N. De-la-rosa-fox et al., Chemically Active Silica Aerogel-Wollastonite Composites for CO2 Fixation by Carbonation Reactions, Ind Eng Chem, vol.46, pp.103-107, 2007.

A. Santos, M. Ajbary, A. Kherbeche, M. Piñero, N. De-la-rosa-fox et al., Fast CO2 sequestration by aerogel composites, J Sol-Gel Sci Techn, vol.45, pp.291-297, 2008.

P. R. Aravind, P. Shajesh, P. Mukundan, K. Pillai, P. Warrier et al., Nonsupercritically dried silica-silica composites aerogel and its possible application for confining nuclear wastes, J. Sol-Gel Sci. Techn, vol.46, pp.146-151, 2008.

J. Reynes, T. Woignier, and J. Phalippou, Permeability measurements in composites aerogels: application to nuclear waste storage, J Non-Cryst Solids, vol.285, pp.323-327, 2001.

T. Woignier, J. Reynes, J. Phalippou, and J. L. Dussossoy, Nuclear Waste Storage in Gel-Derived Materials Journal of Sol-Gel Science and Technology, vol.19, issue.1-3, pp.833-837, 2000.

S. M. Jones and J. Sakamoto, Applications of aerogels in space exploration, Aerogels Handbook, pp.721-746, 2011.

F. Hörz, M. E. Zolensky, R. P. Bernhard, T. H. Seeb, and J. L. Warren, Impact Features and Projectile Residues in Aerogel Exposed on Mir, Icarus, vol.147, issue.2, pp.559-579, 2000.

P. Tsou, Silica aerogel captures cosmic dust intact, J Non-Cryst Solids, vol.186, pp.415-427, 1995.

C. Marlière, T. Woignier, P. Dieudonné, J. Primera, M. Lamy et al., Two fractal structure in aerogel, J Non-Cryst Solids, vol.285, pp.175-181, 2011.

D. W. Schaeffer and K. D. Keefer, Structure of Random Porous Materials: Silica Aerogel, Phys. Rev. Lett, vol.56, pp.2199-2202, 1986.

S. Torquato, Random Heterogeneous Materials. Microstructure and Macroscopic Properties, 2002.

L. J. Gibson and M. F. Ashby, Cellular Solids Structure and Properties, 1988.

R. W. Rice, Porosity of Ceramics Properties and Applications, 1998.

M. Dekker-inc,

R. Calemczuck, A. M. De-goer, B. Salce, R. Maynard, and A. Zarembowitch, Low temperature properties of silica aerogels, Europhys. Lett, vol.3, pp.1205-1211, 1987.

J. Gross, G. Reichenauer, and J. Fricke, Mechanical Properties of SiO2 Aerogels, J. Phys. D Appl. Phys, vol.21, pp.1447-1451, 1988.

J. D. Lemay, T. M. Tillotson, H. W. Hrubesch, and R. W. Pekala, Microstructural Dependence of Aerogel Mechanical Properties, Mater. Res. Soc. Symp. Proc, vol.180, pp.321-328, 1990.

T. Woignier, J. Phalippou, H. Hdach, G. Larnac, F. Pernot et al., Evolution of mechanical properties during the alcogel-aerogel-glass process, J. Non-Cryst. Solids, pp.672-680, 1992.

G. W. Scherer, Crack tip stress in gels, J. Non-Cryst. Solids, vol.144, pp.210-214, 1992.

J. Zarzycki, Critical stress intensity factors of wet gels, J. Non-Cryst. Solids, vol.100, pp.359-363, 19888.

A. G. Evans, Slow crack in brittle materials under dynamic loading conditions, Int. J. Fract, vol.10, pp.251-261, 1974.

A. Alaoui, T. Woignier, F. Pernot, and J. Phalippou, Stress intensity factors in silica alcogels and aerogels in aerogels, J. Non-Cryst. Solids, vol.265, pp.29-36, 2000.

A. G. Evans and G. Tappin, Effects of microstructure on the stress propagate inherent flaws, Proc. Br. Ceram. Soc, vol.23, pp.275-296, 1972.

A. A. Griffith, The phenomenom of rupture and flow in solids Philos, Trans.R. Soc. London Ser. A, vol.221, pp.168-198, 1920.

F. Despetis, P. Etienne, and J. Phalippou, Crack speed in Ultraporous brittle amorphous material, Phys. Chem. Glasses, vol.41, pp.104-106, 2000.

R. Pirard, R. Blacher, S. Brouers, and J. P. Pirard, Interpretation of mercury porosimetry applied to aerogels, J. Mater. Res, vol.10, pp.2114-2119, 1995.

L. Duffours, T. Woignier, and J. Phalippou, Plasticity of aerogels under isostatic pressure, J. Non-Cryst. Solids, vol.186, pp.321-327, 1995.

G. W. Scherer, D. M. Smith, X. Qiu, and J. M. Anderson, Compression of aerogels, J. Non-Cryst. Solids, vol.186, pp.316-320, 1995.

N. Leventis, Three-dimensional core-shell superstructure: mechanically strong aerogels, Acc. Chem. Res, vol.40, pp.874-884, 2007.

H. Lu, H. Luo, and N. Leventis, Mechanical characterization of aerogels, pp.499-535, 2011.

M. Prassas, T. Woignier, and J. Phalippou, Glasses from aerogels I, J Mater. Sci, vol.25, pp.3110-3117, 1990.

T. Woignier, J. Phalippou, and M. Prassas, Glasses from aerogels part 2: The aerogel glass transformation, J Mater Sci, vol.25, pp.3118-3126, 1990.

T. Woignier, J. Phalippou, J. F. Quinson, M. Pauthe, M. Repellin-lacroix et al., The sintering of silica aerogels studied by thermoporometry, J. Sol-Gel Sci. Technol, vol.2, pp.277-281, 1994.

G. W. Scherer, S. Calas, and R. Sempéré, Sintering aerogels, J. Sol-Gel Sci. Techn, vol.13, pp.937-943, 1998.

G. W. Scherer, Sintering of Low Density Glasses: I. Theory, J. Am. Ceram. Soc, vol.60, pp.236-239, 1977.

M. Gronauer and J. Fricke, Acoustic properties of microporous SiO2-aerogel, Acustica, vol.59, pp.177-181, 1986.

M. J. Murtagh, E. K. Graham, and C. J. Pantano, Elastic Moduli of Silica Gels Prepared with Tetraethoxysilane, J. Am. Ceram. Soc, vol.69, pp.775-794, 1986.

W. Dong, T. Faltens, M. Pantell, D. Simon, T. Thompson et al., Acoustic Properties of Organic/Inorganic Composite Aerogels, MRS Proceedings, vol.1188, 2009.

V. Gibiat, O. Lefeuvre, T. Woignier, J. Pelous, and J. Phalippou, Acoustic properties and potential applications of silica aerogels, Journal of Non-Crystalline Solids, vol.186, pp.244-245, 1995.

L. Forest, V. Gibiat, and T. Woignier, Biot's theory of acoustic propagation in porous media applied to aerogels and alcogels, Journal of Non-Crystalline Solids, vol.225, pp.287-292, 1998.

M. Guild, V. García-chocano, J. Sánchez-dehesa, T. Martin, D. C. Calvo et al., On the use of aerogel as a soft acoustic metamaterial for airborne sound, Physical Review Applied, vol.5, issue.3, pp.1-12, 2016.

G. V. Forest and A. Hooley, Impedance matching and acoustic absorption in granular layers of silica aerogels, Journal of Non-Crystalline Solids, vol.285, issue.1-3, pp.230-235, 2001.

T. Woignier, J. Phalippou, J. Pelous, R. Vacher, and E. Courtens, Elastic properties of silica aerogels, J. Non-Cryst. Solids, pp.1197-1202, 1987.

L. J. Gibson and M. F. Ashby, Cellular solids structure and properties, 1988.

T. Woignier, J. Phalippou, R. Sempere, and J. Pelous, Analysis of the elastic behavior of silica aerogels taken as a percolative system, J. Phys. France, vol.49, pp.289-293, 1988.

A. Emmerling and J. Fricke, Scaling properties and structure of aerogels, J. Sol-Gel Sci. Technol, vol.8, pp.781-788, 1997.

H. S. Ma, J. H. Prevost, R. Jullien, and G. W. Scherer, Computer simulation of mechanical structure-property relationship of aerogels, J. Non-Cryst. Solids, vol.285, pp.216-221, 2001.

G. Poelz and R. Riethmiiller, Preparation of silica aerogel for Cherenkov counters, Nucl. Instrum. Methods, vol.195, pp.491-503, 1982.

P. Wang, A. Beck, W. Korner, H. Scheller, and J. Fricke, Density and refractive index of silica aerogels after low-and high-temperature supercritical drying and thermal treatment, Journal of Physics D: Applied Physics, vol.27, pp.414-418, 1994.

J. R. Sandercock, Brillouin scattering study of SbSI using a double-passed, stabilised scanning interferometer, Opt Commun, vol.2, pp.73-79, 1970.

J. R. Sandercock, Simple stabilization scheme for maintenance of mirror alignment in a scanning Fabry-Perot interferometer, J Phys E, vol.9, pp.566-575, 1976.

H. Sussner and R. Vacher, High precision measurement of Brillouin-scattering frequencies, Applied Optics, vol.18, pp.3815-3818, 1979.

R. Vacher, M. V. Shickfus, and S. Hunklinger, A fully stabilized Brillouin spectrometer with high contrast and high resolution, Review of Scientific Instruments, vol.51, pp.288-91, 1980.

M. Montagna, Characterization of Sol-Gel Materials by Raman and Brillouin Spectroscopies, Handbook of Sol-Gel Science and Technology, pp.1153-1182, 2018.

E. Courtens, J. Pelous, J. Phalippou, R. Vacher, and T. Woignier, Brillouin-scattering measurements of phonon-fracton crossover in silica aerogels, Phys Rev Lett, vol.58, pp.128-159, 1987.

E. Courtens, R. Vacher, J. Pelous, and T. Woignier, Observation of fractons in silica aerogels, Europhys Lett, vol.6, pp.245-50, 1988.

C. Levelut, E. Anglaret, and J. Pelous, Brillouin scattering of aerogels densified under uniaxial pressure, J Non-Cryst Solids, vol.225, pp.272-278, 1998.

D. W. Schaefer, C. J. Brinker, D. Richter, B. Farago, and B. Frick, Dynamics of weakly connected solids: silica aerogels, Phys Rev Lett, vol.64, pp.2316-2325, 1990.

R. Vacher, T. Woignier, J. Pelous, and E. Courtens, Structure and self-similarity of silica aerogels, Phys Rev B, vol.37, pp.6500-6503, 1988.

C. Smith, Internal Friction and Ultrasonic Attenuation in Solids, Proceedings of The Third European Conference University of, 1980.

M. Mc-guire and M. E. Fine, Nondestructive detection of fatigue cracks in PM 304 stainless steel by internal friction and elasticity, J Mater Res, vol.8, issue.9, pp.2216-2223, 1993.

J. Gross, R. Goswin, R. Gerlach, and J. Fricke, Mechanical properties of SiO2 -aerogels, J Rev Phys Appl, vol.24, pp.4-185, 1989.

J. Gross, J. Fricke, W. Pekala, and L. Hrubesh, Elastic nonlinearity of aerogels, Phys. Rev. B, vol.45, pp.12774-12777, 1992.

L. Perin, A. Faivre, S. Calas-etienne, and T. Woignier, Nanostructural Damage Associated with Isostatic Compression of Silica Aerogels, J Non-Cryst Solids, vol.333, pp.68-73, 2004.

R. Pirard and J. Pirard, Aerogel compression theoretical analysis, J Non-Cryst Solids, vol.212, pp.262-267, 1997.

T. Woignier and J. Primera, Mechanical Behaviour of nano composites aerogels, J Sol-Gel Sci Technol, vol.58, pp.385-393, 2011.

T. Woignier, J. Primera, A. Alaoui, P. Etienne, and F. Despestis, Calas-Etienne S( 2915) Mechanical Properties and Brittle Behavior of, Silica Aerogels. Gels, vol.1, pp.256-275

C. Marlière, F. Despetis, P. Etienne, and T. Woignier, Very large-scale stucture in sintered silica aerogels as evidenced by AFM and USAXS experiments, J. Non-Cryst. Solids, vol.285, issue.1-3, pp.148-153, 2001.

J. Tucker, Effect of length on the strength of compression test specimens, Amer.Soc. Testing.Mater, vol.45, pp.976-986, 1945.

K. Newman and L. Lachance, The testing of brittle materials under uniform uniaxial compressive stress, Proc.Amer.Soc.Testing.Mater, vol.64, pp.1044-1067, 1964.

J. Lemay, T. Tillotso, L. Hrubesh, and R. Pekala, Microstructural dependence of Aerogel mechanical properties, MRS Proceedings, vol.180, p.321, 1990.

A. Alaoui, T. Woignier, G. W. Scherer, and J. Phalippou, Comparison between flexural and uniaxial compression tests to measure the elastic modulus of silica aerogel, Journal of Non-Crystalline Solids, vol.354, pp.4556-4561, 2008.

S. A. Fawaz, A. N. Palazotto, and C. S. Wang, Axial tensile and compressive properties of highperformance polymeric fibre, Polymer, vol.33, issue.1, pp.100-105, 1992.

A. Hamza, S. J. , W. Lawrence, M. Kucheyev, and S. O. , Depth-sensing indentation of low-density brittle nanoporous solids, Acta Materialia, vol.57, pp.3472-3480, 2009.

K. Johnson, Contact Mechanics, 1985.

D. Tabor, The hardness of solids, 1951.

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, J Mater Res, vol.7, issue.6, pp.1564-1583, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01518596

A. Faivre, L. Duffours, P. Colombel, and F. Despetis, Mechanical behaviour of aerogels and composite aerogels submitted to specific penetration tests, J of Sol-Gel Sci and Tech, 2018.
URL : https://hal.archives-ouvertes.fr/hal-01914738

T. Woignier, J. Reynes, H. Alaoui, A. Beurroies, I. Phalippou et al., Different kinds of structure in aerogels: relationships with the mechanical properties, J Non-Cryst Solids, vol.241, pp.45-52, 1998.

D. Brownlee, P. Tsou, J. Anderson, M. Hanner, R. Newburn et al., Stardust: comet and interstellar dust sample return mission, J Geophys Res, vol.108, issue.E10, p.8111, 2003.

M. Tobin, J. Andrew, D. Haupt, K. Mann, J. Poco et al., Using silica aerogel to characterize hypervelocity shrapnel produced in high power laser experiments, Int J Impact Engng, vol.29, pp.713-721, 2003.

M. L. Oyen and R. F. Cook, A practical guide for analysis of nanoindentation data, Journal of mechanical behavior of biomedical materials, vol.2, pp.396-407, 2009.

J. Malzbender, D. With, and G. , Elastic modulus, hardness and fracture thoughness of SiO 2 -filled methyltrimethoxysilane coatings on glass substrates, J. Non-Cryst Solids, vol.265, pp.51-60, 2000.

M. F. Doerner and W. D. Nix, A method for interpreting the data from depth-sensing indentation instruments, Journal of Materials Research, vol.1, pp.601-609, 1986.

S. V. Hainsworth, C. H. , and P. T. , Analysis of nanoindentation load-displacement loading curves, vol.11, pp.1987-1995, 1996.

J. L. Loubet, J. M. Georges, and G. Et-meille, Vickers indentation curves of elastoplastic materials, Materials science and engineering, pp.72-89, 1986.

W. C. Oliver and G. M. Pharr, An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments, Journal of Materials Research, vol.7, pp.1564-1583, 1992.
URL : https://hal.archives-ouvertes.fr/hal-01518596

P. C. Paris, Cleavage fracture: an overview of some historical aspecst to honor GR Irwin, Engineering Fracture Mechanics, vol.59, issue.4, pp.411-452, 1998.

A. G. Evans, G. Tappin, T. Woignier, and J. Phalippou, Effects of microstructure on the stress propagate inherent flaws, J. Non-Cryst. Solids, vol.23, pp.404-408, 1972.

W. A. Weibull, statistical distribution function of wide applicability, J. Appl. Mech, vol.18, pp.293-297, 1951.

J. D. Sullivan and P. H. Lauzon, Experimental probability estimators for Weibull plots, J. Mater. Sci. Lett, vol.5, pp.1245-1247, 1986.

M. Toki, S. Miyashita, T. Takenechi, S. Kanabe, and A. Kochi, A Large-Size Silica Glass Produced by a New Sol-Gel Process, Journal of Non-Crystalline Solids, vol.100, pp.479-482, 1988.

T. Woignier, F. Despetis, A. Alaoui, P. Etienne, and J. Phalippou, J Sol Gel Sci Technol, vol.19, pp.163-169, 2000.

A. Alaoui, T. Woignier, F. Pernot, and J. Phalippou, J. Non Cryst. Solids, vol.265, p.29, 2000.

J. L. Chermant, F. Osterstock, and G. Vadam, Etude critique de la mesure de K1c dans le cas de quelques matériaux verriers, Verres Refract, vol.34, pp.624-636, 1980.

P. Etienne, J. Phalippou, T. Woignier, and A. Alaoui, Slow crack growth in aerogels, J. Non-Cryst. Solids, vol.188, pp.19-26, 1995.
URL : https://hal.archives-ouvertes.fr/hal-02098399

M. Wiederhorn, Chemical Interpretation of Static Fatigue, J. Am. Ceram. Soc, vol.55, pp.81-85, 1972.

T. A. Michalske and B. C. Bunker, Slow fracture model based on strained silicate structures, J. Appl. Phys, vol.56, issue.10, pp.2686-2693, 1984.

A. G. Evans, Slow crack in brittle materials under dynamic loading conditions, Int. J. Fract, vol.10, pp.251-261, 1974.

P. Etienne, F. Despetis, and J. Phalippou, Subcritical crack velocity in silica aerogels, J. Non-Cryst. Solids, vol.225, pp.266-271, 1998.

R. J. Charles and W. B. Hillig, Symposium on Mechanical Strenght of Glass and Ways of Improving it, pp.511-527, 1961.

S. M. Wiederhorn, Fracture Mechanics of Ceramics, 1974.

R. C. Bradt, D. P. Hasselman, F. F. Lange, and . Eds, , vol.2, p.613

C. Janssen, Specimen for fracture mechanics studies on glass, Ceram. Soc. Jpn, vol.12, pp.8-13, 1974.
URL : https://hal.archives-ouvertes.fr/jpa-00244244

F. Despetis, P. Etienne, and J. Phalippou, Crack speed in ultraporous brittle amorphous material, Phys. Chem. Glasses, vol.41, issue.2, pp.104-106, 2000.

F. Despetis, S. Calas, P. Etienne, and J. Phalippou, Effect of oxidation treatment on the crack propagation rate of aerogels, J. Non-Cryst. Solids, vol.285, pp.251-255, 2001.

F. Despetis, S. Calas-etienne, and P. Etienne, Slow crack growth in silica aerogels: A review, Journal of Sol-Gel Science and Technology, 2018.
URL : https://hal.archives-ouvertes.fr/hal-02098399

T. I. Suratwala and R. A. Steele, Anomalous temperature dependence of sub-critical crack growth in silica glass, J. Non-Cryst. Solids, vol.316, pp.174-182, 2003.

S. M. Wiederhorn, Influence of Water Vapor on Crack Propagation in Soda-Lime Glass, J. Am. Ceram. Soc, vol.50, issue.08, pp.407-414, 1967.

G. W. Scherer, Bending of Gel Beams: method of characterizing mechanical properties and permeability, J Non-Cryst Solids, vol.142, pp.18-35, 1992.

T. Woignier, G. W. Scherer, and A. Allaoui, Stress in aerogel during depressurization of autoclave: II. Silica gels, J Sol-Gel Sci Technol, vol.3, pp.141-150, 1994.

G. Scherer, Relaxation of a viscoelastic gel bar: I. theory, J Sol Gel Sci and Techn, vol.2, pp.169-175, 1994.

, Figure 1