S. Abdel-rahman, Design of phase shifted full-bridge converter with current doubler rectier, Design Note DN, vol.1, p.1, 2013.

H. B. Abdelghani, , 2016.

. Étude, Conception et Réalisation d'un Convertisseur Statique Hybride Multiniveaux Tolérant aux Défauts

H. Akagi, New trends in active lters for power conditioning, IEEE transactions on industry applications, vol.32, issue.6, p.13121322, 1996.

A. Alam and E. , Développement de briques technologiques pour la réalisation de transistors MOS de puissance en Nitrure de Gallium, 2011.

P. Alou, J. A. Oliver, O. Garcia, R. Prieto, and J. A. Cobos, Comparison of current doubler rectier and center tapped rectier for low voltage applications, Twenty-First Annual IEEE Applied Power Electronics Conference and Exposition, 2006. APEC '06, p.7, 2006.

K. Andreas, MOSFET Modeling Aimed at Minimizing EMI in Switched DC/DC Converters Using Active Gate Control, 2009.

S. L. Arevalo, P. Zanchetta, P. W. Wheeler, A. Trentin, and L. Empringham, Control and implementation of a matrix-converter-based ac ground power-supply unit for aircraft servicing, IEEE Transactions on Industrial Electronics, vol.57, issue.6, p.20762084, 2010.

N. Arora, Mosfet modeling for VLSI simulation : theory and practice, International Series on Advances in Solid State Electronics and Technology, 2007.

T. Azoui, P. Tounsi, P. Dupuy, L. Guillot, and J. Dorkel, 3d electro-thermal modelling of bonding and metallization ageing eects for reliability improvement of power mosfets, Microelectronics Reliability, vol.51, issue.9, p.19431947, 2011.

B. R. Lin and K. H. , Analysis and implementation of full-bridge converter with current doubler rectier, IEE Proceedings -Electric Power Applications, vol.152, issue.5, p.11931202, 2005.

I. Baadji, Optimisation de la commande d'un variateur de vitesse à base d'une pile PEMFC, 2014.

M. Baei, A new ZVS-PWM full-bridge boost converter, 2012.

B. J. Baliga, Fundamentals of power semiconductor devices, 2010.

L. Balogh, Design Review : 100W, 400KHz, dc/dc converter with current doubler synchronous rectication achieves 92% eciency, 2001.

P. Barrade, S. Pittet, and A. Rufer, Series connection of supercapacitors, with an active device for equalizing the voltages. PCIM2000 Power Conversion and Intelligent Motion, 2000.

F. Barruel, Analyse et conception des systèmes électriques embarqués. Application aux réseaux de bord d'avion, 2005.

S. Basu, Single Phase Active Power Factor Correction Converters-Methods for Optimizing EMI, Performance and Costs, 2006.

C. Baumann, Architecture et gestion d'un réseau continu maillé haute-tension pour l'aéronautique, 2009.

N. Belhadj-youssef, Modélisation et commande des redresseurs triphasés fonctionnnant à haut rendement et à faible taux de distorsion harmonique : application au redresseur triphasé de Vienne, 2007.

B. Belkacem, Contribution à l'étude de l'eet du vieillissement de modules de puissance sur leur comportement électrothermique, 2014.

M. Beltramini, Contribution à l'optimisation de l'ensemble convertisseur/ltres de sortie vis à vis des contraintes CEM avion, 2011.

J. Biela, D. Aggeler, S. Inoue, H. Akagi, and J. W. Kolar, Bi-directional isolated dc-dc converter for next-generation power distributioncomparison of converters using si and sic devices, IEEJ Transactions on Industry Applications, vol.128, issue.7, p.901909, 2008.

G. Bognár, G. Horvoth, Z. Kohári, . Pang, D. M. Aj et al., Thermal characterization of a radial micro-channel cooling plate, Semiconductor Thermal Measurement and Management Symposium, p.135140, 2005.

A. Bouaa, Techniques de commande prédictive et oue pour les systòmes d'électronique de puissance : application aux redresseurs a MLI, 2010.

M. Bouarroudj-berkani, Etude de la fatigue thermo-mécanique de modules électroniques de puissance en ambiance de températures élevées pour des applications de traction de véhicules électriques et hybrides, 2008.

S. Cetin, Performance analysis of a self-driven phase shifted full bridge converter for data center application, Proc. Advance in Engineering Mechanics and Materials, p.4147, 2014.

M. Charrada, Etude de qualité et de stabilité des réseaux aéronautiques embarqués HVDC, 2013.

Y. S. Chauhan, R. Gillon, B. Bakeroot, F. Krummenacher, M. Declercq et al., An ekv-based high voltage mosfet model with improved mobility and drift model, Solid-State Electronics, vol.51, issue.11, pp.1581-1588, 2007.

Z. Chen, Y. Luo, C. , and M. , Control and performance of a cascaded shunt active power lter for aircraft electric power system, IEEE Transactions on industrial electronics, vol.59, issue.9, p.36143623, 2012.

H. Chung-wen, A. Ruehli, and P. Brennan, The modied nodal approach to network analysis, IEEE Transactions on Circuits and Systems, vol.22, issue.6, p.504509, 1975.

J. Cieslak, Analyse et synthòse d'une architecture coopérative pour la commande tolérante aux défauts-Application a un systòme aéronautique, 2007.

G. Cimini, M. L. Corradini, G. Ippoliti, G. Orlando, and M. Pirro, Passivity-based pfc for interleaved boost converter of pmsm drives, IFAC Proceedings Volumes, vol.46, p.128133, 2013.

T. Detzel and G. M. , Analysis of wire bond and metallization degradation mechanisms in dmos power transistors stressed under thermal overload conditions, Microelectronics Reliability, vol.44, p.14851490, 2004.

H. Dia, Contribution à la modélisation électrothermique : Elaboration d'un modèle électrique thermosensible du transistor MOSFET de puissance, 2011.

A. Eid, H. El-kishky, M. Abdel-salam, and M. T. El-mohandes, Characterization and performance evaluation of advanced aircraft electric power systems, Journal of Power Electronics, vol.10, issue.5, p.571, 2010.

C. Enz, F. Krummenacher, and E. Vittoz, A cmos chopper amplier, IEEE Journal of Solid-State Circuits, p.22, 1987.

C. Enz, F. Krummenacher, and E. Vittoz, An analytical mos transistor model valid in all regions of operation and dedicated to low-voltage and low-current applications, Journal of Analog Integrated Circuits and Signal Processing, vol.8, 1995.

C. C. Enz, F. Krummenacher, and E. Vittoz, A review of thermal characterization of power transistors semiconductor thermal and temperature measurement symposium, 1988.

H. Kuntman and S. Y. , Algorithms on the extraction of bsim mosfet model parameters via measurement data, 2009 International Conference on Electrical and Electronics Engineering -ELECO 2009, pp.237-241, 2009.

J. C. Freeman, Channel temperature model for microwave algan/gan hemts on sic and sapphire mmics in high power, 2004.

D. Frey, Convertisseurs haute tension : Contribution à l'intégration de la fonction interrupteur, 2003.

K. Frita, M. Boussak, A. Naamane, and N. Sirdi, Improvement tolerant control of shunt active power lter under unbalanced loads, International Journal of Sciences and Techniques of Automatic control & computer engineering IJ-STA, 2016.

K. Frita, N. K. Sirdi, E. Baghaz, A. Naamane, and M. Boussak, Electro-thermal model of a silicon carbide power mosfet, 2018.

X. Giraud, Méthodes et outils pour la conception optimale des réseaux de distribution d'électricité dans les aéronefs, 2014.

G. Gong, M. Heldwein, U. Drofenik, K. Mino, and J. Kolar, Comparative evaluation of threephase high power factor ac-dc converter concepts for application in future more electric aircrafts, Applied Power Electronics Conference and Exposition, vol.2, p.11521159, 2004.

K. Guesmi, Contribution à la commande oue d'un convertisseur statique, 2006.

X. Guo and Q. Feng, Passivity-based controller design for pwm dc/dc buck current regulator, Lecture Notes in Engineering and Computer Science, p.875878, 2008.

W. Habra, Développement de modèles thermiques compacts en vue de la modélisation électrothermique des composants de puissance, 2007.

M. Hammadi, Contribution à l'intégration de la modélisation et la simulation multi-physique pour la conception des systèmes mécatroniques, 2012.

M. Hartmann, J. Miniboeck, and J. Kolar, A three-phase delta switch rectier for more electric aircraft applications employing a novel pwm current control concept, Applied Power Electronics Conference and Exposition, p.16331640, 2009.

L. Hua, J. Guo, X. Jing, N. Mi, R. Chung et al., Design considerations for secondary side synchronous rectier mosfets in phase shifted full bridge converter, Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition, p.526531, 2013.

L. Huber, Y. Jang, and M. M. Jovanovic, Performance evaluation of bridgeless pfc boost rectiers, IEEE Transactions on Power Electronics, vol.23, issue.3, p.13811390, 2008.

B. Jacques, Synthèse de nanostructures de carbure de silicium et étude de leurs propriétés optiques, 2008.

B. Kamel, Technique de la passivité dans le domaine de la commande des systèmes d'électrotechnique, 2016.

A. Karvonen and T. Thiringer, Mosfet modeling adapted for switched applications using a state-space approach and internal capacitance characterization, International Conference on Power Electronics and Drive Systems (PEDS), pp.1107-1112, 2009.

, Performance tolerant control of shunt active power lter under unbalanced non linear load, IEEE 16th International Conference on Sciences and Techniques of Automatic Control & Computer engineering, 2015.

J. W. Kolar and M. J. , Three-phase pwm power conversion-the route to ultra high power density and eciency, Proc. of CPES Annual Seminar/Industry Review, 2005.

J. Krencker, J. Kammerer, Y. Herve, and L. Hebrard, Simulation et modélisation électrothermiques dans l'environnement cadence, 2005.

M. K. Krishna, Design, Hardware implementation and Control of a 3-phase, 3-level Unity Power Factor Rectier, 2012.

S. Lacroix, Modélisation et commande d'une chaine de conversion pour véhicule électrique intégrant la fonction de charge des batteries, 2013.

A. Lakrim and D. Tahri, Etude de la cellule de commutation d'une alimentation à découpage dans le cadre de la compatibilité électromagnétique, vol.17, p.387402, 2014.

A. D. Lange, T. B. Soeiro, M. S. Ortmann, and M. L. Heldwein, Three-level single-phase bridgeless pfc rectiers, IEEE Transactions on Power Electronics, vol.30, issue.6, p.29352949, 2015.

O. Langlois, E. Foch, X. Roboam, and H. Piquet, L'avion plus électrique : vers une nouvelle génération de réseaux de bord, La Revue, vol.3, issue.43, 2005.

H. Lee, S. Snyder, A. Patterson, and N. Hovakimyan, Aircraft actuator fault detection and isolation using piecewise constant fault estimation scheme, AIAA Guidance, Navigation, and Control Conference, 2016.

S. Lefebvre and F. Et-miserey, Composants à semi-conducteur pour l'électronique de puissance, 2004.

M. Lemaire, Développement d'un premier modèle intégral d'un réseau électrique d'avion sous EMTP-RV, Ecole Polytechnique, 2012.

S. Lin and M. Chen, Simulation of microinverter with coupled inductors and double-boost topology for solar power conversion systems, Industrial Technology (ICIT), 2016 IEEE International Conference on, p.454459, 2016.

J. Liu, K. L. Wong, S. Allen, and J. Mookken, Performance evaluations of hard-switching interleaved dc/dc boost converter with new generation silicon carbide mosfets, p.16, 2013.

J. Ma, S. Ni, W. Xie, and W. Dong, An improved strong tracking multiple-model adaptive estimation : a fast diagnosis algorithm for aircraft actuator fault, Transactions of the Institute of Measurement and Control, vol.38, issue.7, p.846854, 2016.

B. Mahdavikhah and A. Prodi¢, Low-volume pfc rectier based on nonsymmetric multilevel boost converter, IEEE Transactions on Power Electronics, vol.30, issue.3, p.13561372, 2015.

A. Mallik and A. Khaligh, Control of a three-phase boost pfc converter using a single dc link voltage sensor, IEEE Transactions on Power Electronics, vol.15, p.123131, 2016.

A. Maxim, D. Andreu, and J. Boucher, The analog behavioral spice macromodeling-a novel method of power semiconductor devices modeling, Industrial Electronics Society, 1998. IECON'98. Proceedings of the 24th Annual Conference of the IEEE, vol.1, p.375380, 1998.

L. Mokrani and B. Azoui, Commande Floue D'un Redresseur En Cascade Avec Un Hacheur Double Étage, 2013.

L. Montealegre-lobo, First Simulink Benchmark for O-Line and Real-Time Simulation of More-Electric Aircraft (MEA) Electrical Power System, 2011.

N. Msirdi, B. Elhadi, K. Frita, N. Aziz, and M. Boussak, Simulation model of a sic power mosfet -variables estimation and control of a power source, 14th International Conference on Informatics in Control, Automation and Robotics, p.637643, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01966868

N. M'sirdi, E. Hadi-baghaz, K. Frita, A. Naamane, and M. Boussak, Simulation model of a sic power mosfet variables estimations and control of a power source, Proceedings of the 14th International Conference on Informatics in Control, Automation and Robotics, vol.1, p.637643, 2017.

F. Musavi, W. Eberle, and W. G. Dunford, A high-performance single-phase ac-dc power factor corrected boost converter for plug in hybrid electric vehicle battery chargers, Energy Conversion Congress and Exposition (ECCE), p.35883595, 2010.

F. Musavi, M. Edington, W. Eberle, and W. G. Dunford, Evaluation and eciency comparison of front end ac-dc plug-in hybrid charger topologies, IEEE Transactions on Smart grid, vol.3, issue.1, p.413421, 2012.

A. Navarro-crespin, V. M. Lopez, R. Casanueva, and F. J. Azcondo, Digital control for an arc welding machine based on resonant converters and synchronous rectication, IEEE Transactions on Industrial Informatics, vol.9, issue.2, p.839847, 2013.

B. Nouri, Fonctionnement a fréquence de commutation constante d'un convertisseur AC-AC en utilisant des techniques de commandes avancées, 2011.

M. Odavic, P. Zanchetta, and M. Sumner, A low switching frequency high bandwidth current control for active shunt power lter in aircrafts power networks, Industrial Electronics Society, p.18631868, 2007.

E. Oliveira, L. Morais, S. Seleme, P. Donoso-garcia, P. Cortizo et al., Power factor correction via passivity-based adaptive controller using buck converter operating in continuous mode, Control and Modeling for Power Electronics, p.18, 2008.

E. Oyarbide-usabiaga, Commande Passive des structures de l'Electronique de Puissance, 1998.
URL : https://hal.archives-ouvertes.fr/tel-00822507

J. A. Power and W. A. Lane, An enhanced spice mosfet model suitable for analog applications, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol.11, issue.11, p.14181425, 1992.

F. Prégaldiny, Etude et modélisation du comportement électrique des transistors MOS fortement submicroniques. Theses, Université Louis Pasteur -Strasbourg I. Membres du jury, 2003.

B. N. Pushpakaran, S. B. Bayne, G. Wang, and J. Mookken, Fast and accurate electro-thermal behavioral model of a commercial sic 1200v, 80 m? power mosfet, Pulsed Power Conference (PPC), p.15, 2015.

L. F. Rafanotsimiva, Étude de commandes non linéaires pour réseaux électriques-Application à un système SMIB, 2013.

V. M. Rao, A. K. Jain, K. K. Reddy, and A. Behal, Experimental comparison of digital implementations of single-phase pfc controllers, IEEE Transactions on industrial electronics, vol.55, issue.1, pp.67-78, 2008.

S. Rios-salcedo, A. S. Medina-vazquez, C. Davila-saldivar, and M. A. Gurrola-navarro, Using the ekv model to describe the dc operation in weak inversion of the multiple-input fgmos transistor, CONIELECOMP 2013, 23rd International Conference on Electronics, Communications and Computing, p.154157, 2013.

L. Rossetto, G. Spiazzi, and P. Tenti, Control techniques for power factor correction converters, proc. PEMC, vol.94, 1994.

H. I. Rosten, C. J. Lasance, and J. D. Parry, The world of thermal characterization according to delphi-part i : Background to delphi, IEEE Transactions on Components, Packaging, and Manufacturing Technology : Part A, vol.20, issue.4, p.384391, 1997.

G. Séguier, R. Bausiere, and F. Labrique, L'électronique de puissance, 1983.

S. Seleme, A. Rosa, L. Morais, P. Donoso-garcia, and P. Cortizo, Evaluation of adaptive passivity-based controller for power factor correction using a boost converter, IET Control Theory & Applications, vol.6, issue.14, p.21682178, 2012.

S. Sharma and L. G. Johnson, First order, quasi-static mosfet bulk charge model showing inconsistencies in the bsim power dissipation model, International Semiconductor Device Research Symposium, p.12, 2009.

B. J. Sheu, D. L. Scharfetter, P. K. Ko, and M. C. Jeng, Bsim : Berkeley short-channel igfet model for mos transistors, IEEE Journal of Solid-State Circuits, vol.22, issue.4, p.558566, 1987.

H. Shichman and D. A. Hodges, Modeling and simulation of insulated-gate eld-eect transistor switching circuits, IEEE Journal of Solid-State Circuits, vol.3, issue.3, p.285289, 1968.

T. Shimizu, K. Wada, and N. Nakamura, Flyback-type single-phase utility interactive inverter with power pulsation decoupling on the dc input for an ac photovoltaic module system, IEEE transactions on power electronics, vol.21, p.12641272, 2006.

B. Singh, K. Al-haddad, C. , and A. , A review of active lters for power quality improvement, IEEE transactions on industrial electronics, vol.46, issue.5, p.960971, 1999.

H. Sira-ramirez, R. Perez-moreno, R. Ortega, and M. Garcia-esteban, Passivity-based controllers for the stabilization of dc-to-dc power converters, Automatica, vol.33, issue.4, p.499513, 1997.

P. Songlin, L. Wenjuan, Y. , and Q. , Saber simulation and experimental study on single-phase power factor correction circuit, Measurement, Information and Control (ICMIC), 2013 International Conference on, vol.2, p.10431045, 2013.

K. Steela and B. S. Rajpurohit, A survey on active power lters control strategies, IEEE 6th India International Conference on, p.16, 2014.

D. R. Sterk, Compact isolated high frequency DC/DC converters using self-driven synchronous rectication, 2003.

S. C. Terry, J. M. Rochelle, D. M. Binkley, B. J. Blalock, D. P. Foty et al., Comparison of a bsim3v3 and ekv mosfet model for a 0.5 mu ;m cmos process and implications for analog circuit design, IEEE Transactions on Nuclear Science, vol.50, issue.4, p.915920, 2003.

Y. Touzani, Commande aléatoire du convertisseur Buck-Boost triphasé à prélèvement sinusoïdal du courant, 2006.

S. Vighetti, Systèmes photovoltaïques raccordés au réseau : Choix et dimensionnement des étages de conversion, 2010.

E. Vittoz, C. Enz, and F. Krummenacher, A thermal characterization of power transistors semiconductor, Journal Semi-Therm, vol.11, 1998.

Q. Wang, B. Wen, R. Burgos, D. Boroyevich, and A. White, Eciency evaluation of two-level and three-level bridgeless pfc boost rectiers, Applied Power Electronics Conference and Exposition, p.19091915, 2014.

L. M. Wedepohl and L. Jackson, Modied nodal analysis : an essential addition to electrical circuit theory and analysis, Journal of Engineering Science and Education, vol.11, issue.3, p.8492, 2002.

S. Wünsche, Simulator coupling for electro-thermal simulation of integrated circuits, Proceedings, p.93, 1996.

L. Yang, Modeling and characterization of a PFC converter in the medium and high frequency ranges for predicting the conducted EMI, 2003.

L. Yao, O. Abdel-rahman, I. Batarseh, M. , and H. , A novel current tripler rectication topology for isolated dc-dc converters in high current applications, Conference Record of the 2006 IEEE Industry Applications Conference Forty-First IAS Annual Meeting, vol.5, p.25462553, 2006.

S. Yin, B. Xiao, S. X. Ding, and D. Zhou, A review on recent development of spacecraft attitude fault tolerant control system, IEEE Transactions on Industrial Electronics, vol.63, issue.5, p.33113320, 2016.

W. Zhang, Y. Su, M. Mu, D. J. Gilham, Q. Li et al., High-density integration of high-frequency high-current point-of-load (pol) modules with planar inductors, IEEE Transactions on Power Electronics, vol.30, issue.3, p.14211431, 2015.

X. Zhao and G. M. , Review of aircraft electric power systems and architectures, Energy Conference (ENERGYCON), p.949953, 2014.

S. Zhe, Full bridge dc/dc converter with zero current switching synchronous rectication for auxiliary power units, 2014.

Z. Zouaoui, Commande des convertisseurs statiques DC/DC Par la logique oue, 2007.

, Annexe 1 : Conception des éléments passifs

, Cette fréquence doit être la plus élevée possible pour réduire les dimensions et le poids des composants et les éléments passifs constituant les alimentationsBaadji, 2013.

. Stabilité-par-l'intermédiaire-d'énergie-formée, En utilisant le même système S t déni précédemment, si on xe e T = 0 ou y = 0, la fonction de stockage V (x) de l'équation 58 est décroissante à partir de toutes les trajectoires. Autrement dit, V (x) diminue réellement, et par la suite, le système converge vers un point d'équilibre. Ainsi, ce casV (x)est qualiée comme une fonction de Lyapunov, 2013.

, Les systèmes passifs qui ont cette fonction de stockage dénie positive sont stables et on peut appeler cette méthode

, Cette méthode basée sur la termine le port de système (S t ) par un retour d'état sous forme e = ?K.y. Avec : K = K T > 0 :un gain d'amortissement Ce gain est injecté pour garantir la stabilité du système pour un point d'équilibre x, Stabilité par injection d'amortissement : La stabilité par injection d'amortissement est une méthode très utilisée pour les systèmes mécaniques et électriques

, Alors il est facile de prouver qu'il existe un point d'équilibre x * asymptotiquement stable s'il est détectable par la sortie

. Ramirez, Plusieurs méthodes sont proposées pour assurer la synthèse de lois de commande par la passivité du système non linéaire (CBP) dont on peut citerSira, PBC par rétroaction. -Description de la forme Hamiltonienne à ports, 1997.

, -PBC par anticipation

, -PBC par la balance énergétique et dissipation. -PBC par interconnexion

, Annexe 3 : Fonctionnement de PSFB

, Principe de fonctionnement de PSFB Le chronogramme des allures des courants et tensions au niveau du convertisseur PSFB est montré par la gure suivante Zhe, 2003.

, Où : V g1 , V g2 , V g3 ,V g4 , V g5 et V g6 sont les signaux de commande respectivement des MOSFET Q1, Q2, Q3, Q4, Q5 et Q6, vol.1, 2014.

. Navarro-crespin, Analysons le fonctionnement du convertisseur dans les diérents modes Zhe, 2013.

, Mode I :t 0 à t 1 Les transistors Q1 et Q4 sont passants, au primaire le courant circule de Q1 vers Q4